Rss

Liquid Cooling For All

When it came to building my first rig, my goal was to put together something that could turn on and not fry within 24 hours of use. Though trembling and sweating as I installed each component, I let out a big sigh of relief when the power LED turned on and my loading screen came up. So when Justin Chou came to me with the challenge of installing my first liquid cooler, I just about fainted.

All-In-One Liquid Cooling

How could I keep things up and running by introducing water into my PC? I’m sure I’m not the only one who has thought this before. Well, as I’ve discovered with the KUHLER H2O 650, a compact, uncomplicated approach to liquid cooling works great for a CPU.

Red Flags Lowered
I used to think about liquid cooling as the means to the end…the end of my computer. Corrosion, maintenance, transportation, LEAKAGE – who wants to risk all this and end up spending more money? It didn’t seem worth it to me.

That’s where the KUHLER H2O comes in to save the day. The KUHLER H2O is a compact setup with a small, lightweight pump & cold plate that mounts on the CPU socket, a 120 mm radiator with fan, and a prefilled coolant. The flexible tubing has a low permeability to prevent water from seeping through and messing up your motherboard. Besides, the unit comes factory sealed anyway, so you won’t run the risk of leakage right off the bat. With one of these systems installed, you can have a trouble-free processor, and you can transport your PC to and from LANs without ruining your components.

Water Cooling for All!

I used to think that I needed a liquid cooler only if I planned to overclock or run a high-performing system. True, many liquid cooling systems are designed for pushing your PC to the limits (like our KUHLER H2O 1250), but that’s not what I’m looking to do. On the other hand, I don’t want my CPU to struggle through a Battlefield 4 fragfest.

The KUHLER H2O 650 is a great way to keep my system in check because it performs much better and runs much quieter than a stock cooler, and, unlike some of the massive aftermarket air coolers out there, it puts a lot less physical stress on my CPU socket.

And what about cost? Heaven forbid you cut into your games budget. Well, money has yet to grow on trees, but I find that this liquid cooler is very affordable in today’s world of $300 processors. 70 bucks gets me a stalwart guardian for my CPU, the nucleus of my PC, that I won’t have to fuss with for a few years. Just gaze deeply into your PC, and ask yourself, “What would show my CPU how much I love it?”

Easily fits anywhere

Installation

When I look at a liquid cooler and compare it to other rigid components like graphics cards and PSUs, it looks foreign; perhaps it would go in a fish tank instead of a computer. The thought of the many installation steps, such as mounting the pump onto the socket or getting the tubes to clear your graphics card, seems very daunting for an inexperienced builder like me.

All is well, my friends. Look at it this way; installation is like loading a dishwasher with slots that designate where each item goes. You load your large plates, then your small plates, followed by some cups and then each type of silverware.

With the KUHLER H2O 650, you place the back plate on the back of the motherboard tray, attach the fan to the radiator and secure it to your chassis, fasten the pump and retention ring to your CPU socket and then connect the fan and pump cables. Whew…I guess it’s almost easier done than said, but once you’ve installed your KUHLER H2O, that’s it. There’s nothing else to do but take in the wonders of liquid cooling.

antec-kuhler-650-9x-1280x1024

The compact KUHLER H2O fits in with the modest appearance of my build.

 

I could bore you with a more detailed specs, but instead I’ll point you to a very useful video from NeweggTv right here.

I’d also like to add that the KUHLER H2O comes with thermal paste already applied, so you don’t have to worry about fumbling around with that and guessing how much to use. You’ll have plenty of clearance for your GPU, too.

 

Conclusion
I’ll admit that you may end up taking more time to install a liquid CPU than an air cooler, but you get some awesome benefits from having one up and running in your rig.

First, the KUHLER H2O does the job right without constantly reminding me; I can hardly hear the fan or the liquid circulating through the tubes.

Second, I don’t have to refill the liquid to keep performance up to par, and I don’t have to move the unit around to upgrade my RAM or GPU (just my processor, but I know that’s working very well!).

Third, a liquid cooler looks much more stylish and, dare I say, avant garde when compared to a giant heatsink. A couple of my friends still don’t believe I put it together.

And what I absolutely love about the KUHLER H2O 650 is that there’s nothing you have to do following installation; just sit back, play an FPS or two, and let the components do the work. That peace of mind alone is worth my 60 bucks.

 

Here’s a couple of review sites that you might want to check out

bit-tech

pureoverclock

techspot

 

 

Share

Leave a Reply

Your email address will not be published. Required fields are marked *


*